UGC approved journal IJNRD Research Journal


INTERNATIONAL JOURNAL OF NOVEL RESEARCH AND DEVELOPMENT (IJNRD)
An International Open Access Journal |   ISSN: 2456-4184 |  IMPACT FACTOR: 5.57

Call For Paper

Issue: April 2019

Volume 4 | Issue 4

Impact Factor: 5.57

Submit Paper Online

Click Here For more Details

For Authors

Forms / Download

Editorial Board

Subscribe IJNRD

Facts & Figure

Impact Factor : 5.57

Issue per Year : 12

Volume Published : 4

Issue Published : 35

Article Submitted : 546

Article Published : 342

Total Authors : 886

Total Reviewer : 538

Total Pages : 79

Total Countries : 20

Visitor Counter


Indexing Partner

Published Paper Details
Paper Title: Experimental Investigation and Weld Characteristics of GMAW with EN 8 and SS 409
Authors Name: M.Mohan , A.Balamurugan , B.Saravanakrishnan , E.Venkatesan
Author Reg. ID:
IJNRD_170177
Published Paper Id: IJNRD1712006
Published In: Volume 2 Issue 12, December-2017
Abstract: The dissimilar metal joints have been emerged as a structural material for various industrial applications which provides good combination of mechanical properties like strength, corrosion resistance with lower cost. Selections of joining process for such a material are difficult because of their physical and chemical properties. The stainless steel and mild steel dissimilar material joints are very common structural applications. Joining of stainless steel and mild steel is very critical because of carbon precipitation and loss of chromium leads to increase in porosity affects the quality of joint leads deteriorates strength. Gas metal arc welding is a fusion welding process having wide applications in industry. In this process proper selection of input welding parameters is necessary in order to control weld distortion and subsequently increase the productivity of the process. In order to obtain a good quality weld and control weld distortion, it is therefore, necessary to control the input welding parameters. In this research work experiments has to be carried out on EN 8 & SS409 stainless steel of 4 mm thick using gas metal arc welding (GMAW) process. The research will be applied Taguchi Method on an austenitic stainless steel specimen of dimensions 100 × 100 × 10 mm, which have following interested parameters: various arc current arc voltage and welding torch angle. The experiment has to be done in following aspects: Ultimate tensile strength. The main objective of the experimental factors affecting to mechanical property of dissimilar steel with semi automatic Gas Metal Arc Welding (GMAW) through various welding parameters.
Keywords: Weld Characteristics, GMAW, SS409, EN 8.
Cite Article: "Experimental Investigation and Weld Characteristics of GMAW with EN 8 and SS 409 ", International Journal of Novel Research and Development (www.ijnrd.org), ISSN:2456-4184, Vol.2, Issue 12, page no.25-31, December-2017, Available :http://www.ijnrd.org/papers/IJNRD1712006.pdf
Downloads: 000218
Share Article:

Click Here to Download This Article

Article Preview

ISSN Details

DOI (A digital object identifier)



Providing A digital object identifier by DOI

RMS

Conference Proposal

Latest News / Updates

Open Access License Policy

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License

Creative Commons License This material is Open Knowledge This material is Open Data This material is Open Content

Important Details

Social Media

IJNRD