|
|||||||||||||||
|
INTERNATIONAL JOURNAL OF NOVEL RESEARCH AND DEVELOPMENT International Peer Reviewed & Refereed Journals, Open Access Journal ISSN Approved Journal No: 2456-4184 | Impact factor: 8.76 | ESTD Year: 2016 Scholarly open access journals, Peer-reviewed, and Refereed Journals, Impact factor 8.76 (Calculate by google scholar and Semantic Scholar | AI-Powered Research Tool) , Multidisciplinary, Monthly, Indexing in all major database & Metadata, Citation Generator, Digital Object Identifier(DOI) |
||||||||||||||
Issue: May 2024
Volume 9 | Issue 5
Review Result and Publication of Paper within : 2-3 days
Click Here For more DetailsFor Authors
Forms / Download
Published Issue Details
Editorial Board
Other IMP Links
Facts & Figure
Impact Factor : 8.76
Issue per Year : 12
Volume Published : 9
Issue Published : 96
Article Submitted :
Article Published :
Total Authors :
Total Reviewer :
Total Countries :
Indexing Partner
Join RMS/Earn 300
Licence
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
|
Published Paper Details
|
|
| Paper Title: | Influuence of Percent Weight Variation of Pulverised Periwinkle Shells on Hardness and Tensile Strength of Periwinkle Shells-Aluminum Alloy Composite |
| Authors Name: | Agbadua Segun A , Orumwense F.F.O , Ebunilo P.O.B , Sadjere G.E |
| Download E-Certificate: | Download |
| Author Reg. ID: |
IJNRD_202994
|
| Published Paper Id: | IJNRD2308153 |
| Published In: | Volume 8 Issue 8, August-2023 |
| DOI: | |
| Abstract: | ABSTRACT The Development in the applications of Aluminium Alloy in the industries is not unconnected to its lighter weight, recyclability, cost, and availability. The cost of reinforcement materials cause the increase cost of composites production thereby limiting its applications. Efforts to reduce the cost of composite materials is to source alternative reinforcement materials. The addition of pulverised periwinkle shells(PPS) would strengthened Aluminium Alloy, and increased its horizon of applications. To determine the percent weight of Pulverised Periwinkle Shells(PPS) that would give excellent strength to Aluminium alloy(AA) in increasing its hardness and tensile strength. The Periwinkle Shells were boiled in water at 1000C for thirty (30) minutes, washed using distilled water, dried in an oven at 1050C for 24hours.The periwinkle shells were pulverised and discretised using a sieve shaker of mesh sizes of 70 and 53 microns. The grade of 53microns was used because it was finer. The compositional analysis of AA, PPS, and charge calculations were done and the following percent weight of PPS were used: 10%; 15%; 20%; and 25% as reinforcement, and 0% of as-cast AA was used as the control. Gas crucible furnace was used to melt the AA at 7500C, and the liquid AA was taken out from the furnace and 1% of magnesium was added before the addition of the percent weight of PPS, and the mixture stirred using mechanical stirrer. The slurry was taken back to the furnace and heated, and at 7500C it was fetched and poured into the reusable moulds to produce the test coupons for Hardness and Tensile strength test and the process was repeated for all the compositions. Hardness and tensile strength test was done using Indentec universal hardness tester and Universal testing machine. The results obtained from the study shows that 20% PPS-AA Composites exhibit the highest hardness number HRB (85.35) and tensile strength value; 204.25MPa compared with unreinforced AA and other reinforced AA. From the results obtained 20% PPS-AA composite would be suitable for applications that required good hardness and tensile strength. |
| Keywords: | Percent weight, Pulverised Periwinkle Shells, Reusable moulds, Wetting, Aluminium Alloy |
| Cite Article: | "Influuence of Percent Weight Variation of Pulverised Periwinkle Shells on Hardness and Tensile Strength of Periwinkle Shells-Aluminum Alloy Composite", International Journal of Novel Research and Development (www.ijnrd.org), ISSN:2456-4184, Vol.8, Issue 8, page no.b435-b439, August-2023, Available :http://www.ijnrd.org/papers/IJNRD2308153.pdf |
| Downloads: | 000118759 |
| ISSN: |
2456-4184 | IMPACT FACTOR: 8.76 Calculated By Google Scholar| ESTD YEAR: 2016 An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 8.76 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator |
| Publication Details: |
Published Paper ID:IJNRD2308153 Registration ID: 202994 Published In: Volume 8 Issue 8, August-2023 DOI (Digital Object Identifier): Page No: b435-b439 Country: Nnewi, Anambra, Nigeria Research Area: Mechanical Engineering Publisher : IJ Publication Published Paper URL : https://www.ijnrd.org/viewpaperforall?paper=IJNRD2308153 Published Paper PDF: https://www.ijnrd.org/papers/IJNRD2308153 |
| Share Article: |
|
|
Click Here to Download This Article |
|
| Article Preview | |
|
|
|
Major Indexing from www.ijnrd.org
| Semantic Scholar | Microsaoft Academic | ORCID | Zenodo |
| Google Scholar | ResearcherID Thomson Reuters | Mendeley : reference manager | Academia.edu |
| arXiv.org : cornell university library | Research Gate | CiteSeerX | PUBLON |
| DRJI | SSRN | Scribd | DocStoc |
ISSN Details
 |
 |
|
ISSN: 2456-4184
Impact Factor: 8.76 and ISSN APPROVED
Journal Starting Year (ESTD) : 2016
DOI (A digital object identifier)
Conference
Open Access License Policy
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Important Details
Social Media
Licence
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Join RMS/Earn 300
| Copyright © 2024 - All Rights Reserved - IJNRD |
Facebook Twitter Instagram LinkedIn