INTERNATIONAL JOURNAL OF NOVEL RESEARCH AND DEVELOPMENT International Peer Reviewed & Refereed Journals, Open Access Journal ISSN Approved Journal No: 2456-4184 | Impact factor: 8.76 | ESTD Year: 2016
Scholarly open access journals, Peer-reviewed, and Refereed Journals, Impact factor 8.76 (Calculate by google scholar and Semantic Scholar | AI-Powered Research Tool) , Multidisciplinary, Monthly, Indexing in all major database & Metadata, Citation Generator, Digital Object Identifier(DOI)
The basic purpose of this review is to check if the quality accepted to the customers lies within the desired tolerance limit or not. Therefore the surface roughness and dimensional accuracy needs to be optimized using a Vertical Milling Centre with the process parameters including spindle speed, feed rate and depth of cut. Utilizing an orthogonal array of L27 (3^3) based on the number of parameters and their levels were investigated. Employing Taguchi’s Design of Experiments (DOE) method, experimental data was collected through 27 runs to analyse the impact of these factors. Signal-to-noise ratio (S/N ratio), analysis of variance (ANOVA), and regression analysis were then performed to ascertain optimal levels, response ranges, and the percentage contribution of each parameter. The experimentation took place on a HAAS mini-mill centre, programmed with MasterCam 21 software, while surface roughness was measured using the Mitutoyo SJ-210 instrument, and dimensional measurements were conducted with a digital precision measurement instrument. The comprehensive results of the experiments were compiled and tabulated using Minitab-19.
"A REVIEW ON THE EFFECT OF MILLING PROCESS PARAMETERS ON SURFACE ROUGHNESS AND DIMENSIONAL ACCURACY OF EN31 USING TAGUCHI METHOD", International Journal of Novel Research and Development (www.ijnrd.org), ISSN:2456-4184, Vol.9, Issue 1, page no.c532-c535, January-2024, Available :http://www.ijnrd.org/papers/IJNRD2401268.pdf
Downloads:
000118765
ISSN:
2456-4184 | IMPACT FACTOR: 8.76 Calculated By Google Scholar| ESTD YEAR: 2016
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 8.76 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
Facebook Twitter Instagram LinkedIn